THI^®F-520 quenching oil additive

This product can improve the cooling characteristics of a variety of oil products, especially it has excellent effect on increasing the cooling rate. When a certain amount of this additive is added, the cooling rate can be improved to the cooling rate of rapid quenching oil. It not only increases the cooling rate for diesel, but also significantly increases the temperature corresponding to the maximum cooling rate. It can restore the used rapid quenching oil to its original cooling performance.

①The additive has good compatibility with oil. Add the addictive in a certain proportion, stir evenly before use.
②It is suitable for a wide range of oil temperature. This product can be quenched at room temperature or used under heating conditions.
③The use of rapid quenching oil additives increases the temperature corresponding to the maximum cooling rate, expands the range of rapid cooling temperature and enhances the cooling effect. The fast-polishing quenching oil also has the above excellent characteristics.
④The quenching hardness and the depth of hardening of the workpiece are significantly improved. The quenching distortion is effectively controlled.

①It is suitable for preparing new quenching oil. Add the additive to the base oil or mechanical oil that meets the requirements to form the new quenching oil.
②The used quenching oil can be restored by adding the addictive. When the used quenching oil no longer meet the production requirements due to product technical conditions, such as insufficient hardness and poor luster, add additives to the used oil to prepare a new quenching oil that meets the requirements.
③ Delay the oxidation process of the quenching oil. Adding additives to the quenching oil can increase the service life of the original oil.

①Before using the quenching tank, the oxide scale and carbon black on the surface of the quenching tank should be cleaned to maintain the quenching performance of the rapid quenching oil additive to the workpiece.
②The quenching tank needs to be equipped with cooling and heating devices to prevent the temperature gets too high or too low.
③In order to extend the service life of quenching oil additives, stir properly during use. Appropriate stirring can ensure stable performance of the quenching oil. An appropriate amount of preservative (such as sodium benzoate) can also be added to it.

①The recommended operating temperature of the fast quenching oil additives is around 40-80℃. The addictive has the best cooling characteristics in this range of temperature.
②avoid mixing in water when using this product to prevent uneven hardness of the workpiece from affecting the quality of the quenched workpiece.
③After using this product for a period of time, in order to maintain the cooling capacity, replenish the quenching oil additives regularly.
④Before discharging quenching oil additives, it should be diluted with water to make the biological oxygen consumption lower than the national discharge standard.

25KG, 200KG/drum packaging. Please store in cool places. The storage life is 2 years. Transported as general chemicals.