THI^®F-605 fast-drying dehydration antirust oil

This product can form a layer of anti-rust oil film on the surface of metal after dried to protect the metal from corrosion. It has good resistance to salt spray and hand sweat, and it can prevent rust for 6 months.

①It has excellent ability to remove water film on metal surface.
②form thin film, non-stick, not greasy. the oil film is easy to clean and does not affect subsequent processing.
③Fast drying. it can be dried within 10-15 minutes after application.
④Excellent anti-rust performance. It can prevent rust up to 6 months.

It is suitable for dehydration and rust prevention of mechanical products, parts, hardware, tools, auto parts, etc. It can also be used for cleaning and rust prevention between procedures and short-term sealing.

①Before applying the antirust oil, remove the grease, moisture and hand sweat on the surface of the workpiece (THIF-301 cleaning agent can be used for cleaning).
②According to the specific production process, soaking, spraying, brushing and other methods can be used to apply the antirust oil. After applied, the surface can be dried naturally, blow-dried, or dried by dryer to form an anti-rust film.
③After the surface is dried, it can be sealed and packaged. VCI paper or other anti-rust packaging can be used.

①This product should be sealed after use to prevent water seepage and volatilization.
②It is strictly forbidden to open flames. Pay attention to ventilation and be careful of fire hazards.
③When packaging and storing, try to avoid collisions between the workpieces to avoid damage to the oil film.

20KG, 165KG/barrel packaging. Please store in cool places. The storage life is 2 years. Transported as general chemicals.