THI^®S-8200 Thread-locking sealant

THIS-8222 Thread-locking sealant

◇Low strength, thixotropic, easy to disassemble.
◇Used to lock and seal M2-M8 screw fasteners to prevent thread corrosion.
◇ used for screwdriver head, cross head and small diameter screw lock and seal. It has a certain degree of lubricity and can accurately achieve the desired locking strength.

THIS-8242 Thread-locking sealant

◇used for general purpose, medium strength. It has thixotropic viscosity and can be disassembled with hand tools.
◇Used for M8-M16 screw locking and sealing to prevent thread corrosion.
◇detachable thread locking sealant. It has a certain degree of lubricity and can accurately achieve the desired locking strength.

THIS-8243 Thread-locking sealant

◇Medium high strength. It can be used on inert surfaces and has good oil holding capacity. It is easy to disassemble and can be used on slightly oily working surface.
◇Used for locking and sealing of threads below M20.

THIS-8262 Thread-locking sealant

◇High strength, thixotropic viscosity, excellent resistance to media, and can be disassembled with hand tools.
◇Used for locking and sealing of M10-M26 screw fasteners to prevent thread corrosion.
◇usually used for thread locking, sealing and engine cup-shaped sealing.

THIS-8271 Thread-locking sealant

◇High strength, medium viscosity.
◇Used for permanent locking and sealing of M16-M26 screw fasteners to prevent thread corrosion.
◇usually used for screwing double-headed studs into the end for locking (such as cylinder studs). It has high strength, high viscosity and high temperature resistance.

THIS-8272 Thread-locking sealant

◇it has high temperature resistance and high strength.
◇It is used for bolt locking under high temperature conditions, and the high temperature resistance can reach 230℃.
◇Used for permanent locking and sealing of M16-M26 screw fasteners to prevent thread corrosion.

THIS-8277 Thread-locking sealant

◇Super high strength and high viscosity. Excellent chemical resistance. It is permanently locked and generally needs to be heated for disassembly.
◇Used for permanent locking and sealing of M24-M36 screw fasteners to prevent thread corrosion.
◇Typical used for large-diameter thread locking and sealing.

THIS-8290 Thread-locking sealant

◇Medium strength, low viscosity, high permeability and fast curing.
◇Used to lock and seal the assembled threaded fasteners below M12 to prevent thread corrosion.
◇It can also be used to seal micro-holes such as welding line, cracks, castings sand holes and loosening parts with a gap below 0.1mm.
◇usually used for adjusting screw locking, welding cracks, casting cracks, filling loosened micro-holes.