THI^®X-P628 demulsifier

Brand：Thinking Finechem
Model number：THI^®X-P628
Appearance：yellowish brown to light yellow viscous liquid
PH：8.0-12.0
package size：25 KG / barrel
For sample and more info, please contact us (Email: info@thinkingchem.com)

The demulsifier can eliminate the interference of the electrical double layer and quickly approach the emulsion interface to make the two phases easier to separate, thereby greatly improving the demulsification ability of the fermentation broth. the product has good demulsification effect and the dosage is only about 100ppm. It can also improve the yield of penicillin. The yield can be stabilized at 94% and above. The product has high impurity removal rate. Less impurities and pigments are brought into the product and there is no demulsifier residue in the ester phase of the extraction layer. This helps to improve the quality of penicillin finishing products, save penicillin production costs, and has no bad odour, which is why our product is very popular among workers in pharmaceutical factories.

① No bad odour, good demulsification effect.
②Improve the yield of penicillin. The yield can be stabilized at 94% and above.
③ No residue of demulsifier in the ester phase of the extraction layer.
④Improve the quality of penicillin products and save penicillin production costs.

The following test compares the demulsifying effect of THI^®X-P628demulsifier with the other two demulsifiers.
Take 50ml of penicillin filtrate and 20ml of butyl acetate, add 1-2ml (200-400ppm) of demulsifier (2% aqueous solution), add sulfuric acid (1.2%), adjust PH value to 1.9-2.1, stir at 3000r/min for 2 minutes, take 1ml of solution, place it in a centrifuge tube and centrifuge at 2000r/min for 2-3 minutes (Table 1); place the remaining solution in a graduated cylinder and let it stand. Observe the separation of oil and water phases (Table 2).

The effect of our demulsifier on the demulsification of penicillin fermentation broth is shown in Table 1 and Table 2

Subject	THI^®X-P628 demulsifier	95111376	PPB
Demulsification time (min)	0.5	5	20
Emulsion layer content V%	0.4	0.7	5
Yield of butyl acetate	98.5%	98%	95%

Table 1 Comparison table of demulsifier effect

Subject	THI^®X-P628 demulsifier	95111367	PPB
200ppm	light and heavy phases are clear, the interface is thinner than typing paper	light and heavy phases are unclea	Still emulsified
400ppm	light and heavy phases are clear, the interface is thinner than typing paper	light and heavy phases are clear, the interface is thinner than typing paper	Still emulsified

Table 2 Comparison table of demulsifying effect of demulsifiers at different concentrations

Subject	Indicator
Appearance	Yellowish brown to light yellow viscous liquid
Relative density	0.9-1.2
Amine value (mg/g)	≥260
pH (1% aqueous solution)	8.0-12.0
Moisture content (%)	≤8
Ash content (%)	≤0.5